Friday 10 November 2017

Custom Lego Scene Hazmat Guy Breaking Bad Chemical Spill

















Custom Lego Breaking Bad inspired custom diorama. The scene includes the Minifigures Series 4 Hazmat guy, alongside a handcart and split toxic waste barrel. Split over two floors of an industrial facility, the toxic waste barrel has spilled waste which is burning its way through the floor to the one below. The lower floor features an opened crate and crowbar. There is also pipework running through the scene made of dark grey cylinder pieces and the wheel from the Lego Batman Movie set 70901, 'Joker's Escape'.

Both floors are tiles and the piece is built on an 8x8 Green Lego baseplate. 

Other Lego parts used include;

11211 Medium Stone Grey Brick 1 x 2 with studs on 1 side.
3941 / 6143 2x2 round brick in Yellow, used for the barrel.
2495 Minifig Hand Truck in Red.
3062 Dark Grey Round Brick 1 x 1 for the pipework.
3068 Tile 2 x 2 in Tan for the upper floor and Medium Stone Grey for the lower floor.
63864 1 x 3 tiles in both Tan and Medium Stone Grey for the floors
30414 Brick 1 x 4 with studs on one side in Medium Stone Grey on to which the 31 degree wedge pieces (under upper floor and at rear of base).
61780 Container 2 x 2 in Dark Stone Grey with a 3068 2 x 2 Dark Stone Grey tile as a lid.
58176 Light cover in Transparent Red to the right of the wheel on the upper floor.
3022 3020 3795 various Medium Stone Grey plates used to create the upper floor.
30385 Transparent Neon Green Rock 1 x 1 with 5 points.
4032 1 x 1 round plate in Medium Stone Grey and Transparent Neon Green for the toxic wast the hazmat guy has spilt.
83484 Decorated dial tile shown as a pressure gauge on the upper floor. 
4162 1 x 8 tile in Medium Stone Grey to top off the upper wall
98138 in Medium Stone Grey to cap off the pipe on the upper floor to the left. 
14769 Round tile 2 x 2 with bottom stud holder in black for the lid which has come off of the toxic waste barrel.
87087 Brick 1 x 1 with stud on one side. The pressure gauge on the upper floor is mounted on this with a standard 1 x 1 Medium Stone Grey (3005) brick to the left of this and behind the pipe. 
3070 tile 1 x 1 in Medium Stone Grey on the lower floor
98283 1 x 2 brick with brick pattern embossed in Medium Dark Flesh for the lower floor and Medium Stone Grey on the upper. 
92585 Crowbar in Red.
18862 / 33847 / 50746 31 degree slopes in both Medium and Dark Stone Grey.
2412 / 15561 / 30244 Grille 1 x 2 in Medium Stone Grey.

 

1 comment:

  1. This is a wonderful Vignette! Would you consider putting it on Rebrickable? I think the community there would really appreciate it :)

    ReplyDelete